technical data sheet 7-16 protection cap for 7/16 jack 60Z118-000N rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 1 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/05.10/6.0 all dimensions are in mm; tolerances according to i so 2768 m-h interface according to iec 60169-4, vg 95250, en 122190, din 47223 material and plating connector parts material plating cover plate brass white bronze(e.g. optalloy?) gasket silicone mechanical data mating cycles min. 500 coupling nut retention 3 450 n coupling torque (recommended) 0.7 nm to 1.1 nm proof torque max. 1.7 nm
technical data sheet 7-16 protection cap for 7/16 jack 60Z118-000N rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 2 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/05.10/6.0 environmental data temperature range -55 c to +155 c rapid change of temperature din en 122190, sub-cla use 4.6.7 corrosion resistance din en 122190, sub-clause 4.6. 10 vibration din en 122190, sub-clause 4.6.3 climatic category din en 122190, sub-clause 4.6.5 (55/155/56) damp heat din en 122190, sub-clause 4.6.6 degree of protection (mated pair) iec 60529, ip68 2.5 bar 2002/95/ec (rohs) compliant packing standard 40 pcs in box weight 30 g/pce (tbd) draft date approved date rev. engineering change n umber name date r.fang 07/12/10 r.fang 27.06.11 a00 11-s290 tobias stadler 27.06.11 while the information has been carefully compiled t o the best of our knowledge, nothing is intende d as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|